MPT Phase Failure (Overheat) Protector

MPT Phase Failure (overheat) Protector for compressor

MPT Phase Failure (overheat)protector

(overload, overheat, over/under Volt., phase loss, Phase sequence protector)

MPT use PC to detect voltage’s waveform, size, Phase position to decide the voltage is normal or abnormal. It also can quickly detect with inductance load. Available for protection 3 phase equipments for Over/Under volt, Phase Loss. Phase Reversal and overload/overheat protection. 

(overload, overheat, over/under Volt., phase loss, Phase sequence protector)

MPT use PC to detect voltage’s waveform, size, Phase position to decide the voltage is normal or abnormal. It also can quickly detect with inductance load. Available for protection 3 phase equipments for Over/Under volt, Phase Loss. Phase Reversal and overload/overheat protection.

Features:

1. 3 Phase voltage imbalance protection.

2. Statistic/dynamic phase loss protection.

3. Phase Failure protection.

4. over/under volt. Protection ( 8 Sec delay)

5. Overload, overheat protection.

6. Withstand voltage: 4000VAC

Main Circuit: Rated Volt.(3/690V AC,50/60Hz)

Auxiliary Circuit:

Use Category: AC15, DC13

Rated Work Volt.: 250VAC OR 30VDC

Rated Work Current: 250VAC 2A, 30VDC 1.5A

Rated Thermal Current : 5A

PTC Temperature Detection Circuit:

  Meets DIN44081/082 Standards, 1-9 line PTC detected. 25°C, (R25,R)<1.8KΩ,

  (Rtrip)=4.5KΩ 5% (Rreset)=2.75KΩ 5% 

Notes: Resistance Ω and Trip Ω and reset Ω could be customized.

MPT Phase Failure (Overheat) Protector